Dental Alginate Impression Material, Color Change Display, 454g/pack, 991176

Tax included. Shipping calculated at checkout.

Product Performance:

The product mainly consists of alginate, gypsum, and diatomaceous earth
Dustless
Peppermint
Color change display
Excellent elasticity
Clear impression

Precautions:

The temperature and hardness of blended water (tap water) can affect the curing time of the printing material。It is recommended to use distilled water or deionized water at 23 ℃ ± 1 ℃.
It is recommended to use a perforated tray when taking out the mold.
If in contact with eyes, rinse with clean water for a few minutes. If symptoms persist, consult an ophthalmologist and do not swallow or take orally. If discomfort occurs after swallowing the formed material, seek medical attention immediately.
Only for dental professionals. Do not use alginate if it has an unpleasant odor.
This product is transported in a covered carriage and cabin, keeping it clean and avoiding sunlight and rain.
Store at a temperature below 30 ℃ and a humidity below 80%. After opening the bag, seal immediately to prevent moisture.

Usage:

Suitable for making dental and oral tissue impressions.
Shake the materials inside the packaging evenly before use.

Powder water ratio: 10g/22ml Mixing time: 30 ˝，

Initial setting time: 2'10 ˝ ± 20%

Working hours: ≥ 1'30 ˝ (The penetration value should be ≤ 0.25mm)

The above data was obtained at a room temperature of 23 ℃ ± 2 ℃ and a water temperature of 23 ℃± 1℃.

Pour the powder and water into a rubber bowl and quickly stir with a mixing knife for 30 minutes ˝， Until the mixture appears as a delicate and uniform paste without particles.
Fill the mixed paste into the impression tray, place it in the mouth, and leave it in the mouth for 1'30 ˝。
After the impression is taken out of the mouth, rinse with running tap water to remove saliva or debris. Immediately use type 3 or 4 gypsum that meets the requirements of ISO6873 to fill the gypsum model. If the gypsum model cannot be filled immediately, store the impression in a sealed plastic bag with 100% humidity.

Weight(Kg): 0.5

Quantity per unit: 1

Category: IMPRESSION